Home pageProductAmplifiersGain Block AmplifiersGain Blocks: InGaP HBT

DC-2.5

DC-2.5
Datasheet
S-Parameters
Request More Information
Part # CGB7289-SC (@ 2140 MHz)
Preview
Key features

41.0 dBm Output IP3 @ 2140 MHz
21.0 dB Gain @ 900 MHz
13.3 dB Gain @ 2140 MHz
23.7 dBm P1dB @ 2140 MHz
Low Performance Variation Over Temperature
Low Cost: SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >2000V HBM
Low Thermal Resistance: <35ºC/Watt
Low Volt Supply: 5V, Active Bias

Description

The CDQ6004-QS is a dual high dynamic range amplifier designed for applications operation within the 0.05 to 4.0 GHz frequency range. Co-located matched amplifiers are assembled in the 4mm X 4mm QFN package. The low-cost, surface-mount, 16 terminal, plastic package is RoHS compliant. The CDQ6004-QS is an ideal solution for implementing balanced or push-pull designs. The amplifier can also be used for dual-band operation where single-ended design is used for each band. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of low noise figure and high IP3 at the same bias point make it an ideal transmit or receive solution when used in applications including CATV operating from 50 to 850 MHz, cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN) operation at 2.4 GHz. All devices are 100% RF and DC tested.

Specification
Frequency (GHz) DC-2.5
P1dB (dBm) +23.7
Gain (dB) 13.5
Icc (mA) 115
Output IP3 (dBm) +41.0
Voltage (V) +4.76 / +7.0
NF (dB) 5.5
Package () -SC (SOT-89)
Markets () I / S / P / D
Typical Applications
  • PA Driver Amp, IF Amp, LO Buffer Amp
    Cellular, PCS, GSM, UMTS, 3G
    Wireless Data and SATCOM
    Transmit and Receive Functions
    CATV